Industry Tool
Auto Equipment & Tool
Safety & Protection
Construction&DYProduct No.：90708A
Product Name：Lithium-ion Rechargeable Spotlight
Specification
- Product No. 90708A
- pcs / pack4
- MADE INChina
- Capacitance（mAH）Lithium Battery 6000MAH
- Warranty TermsThis product is consumable, not within SATA lifetime warranty.
Introduction
| ◆ | Light source upgraded to 3 W LED, increasing the brightness by more than 50% | ||||
| ◆ | Battery upgrade, doubling the original electric capacity at least | ||||
| ◆ | Lighting positions include work light, highlight and flashing | ||||
| ◆ | The green indicator comes on in standby mode; during charging, both the green and red indicators come on; when charging is completed, the red indicator will go off, and the green indicator stays on. | ||||
| ◆ | Lithium-ion batteries, effectively protecting the safety of the battery and extending its service life | ||||
| ◆ | Bracket available for angle adjustment. Reflective harness and rainproof design; anti-skid handle, working head and base | ||||
| ◆ | Rated voltage: 3.7 V | ||||
| ◆ | Battery capacity: 6000 mAh | ||||
| ◆ | Discharge time: High power mode: 6 h; low power mode: 3 h | ||||
| ◆ | Recharge time: 4 ~ 7 h | ||||
| Precautions: | |||||
| ◆ | Never throw the product into water or fire. | ||||
| ◆ | Prevent the product from falling or impacting with hard objects, and avoid scratching or crushing the product. | ||||
| ◆ | If the membrane switch is damaged, replace it immediately to prevent foreign materials from entering. | ||||
| ◆ | The battery is not fully charged upon delivery. Before using the light for the first time, be sure to charge it continuously for more than 12 hours. | ||||
| ◆ | Fully charge and discharge the battery at an interval of at least 6 months. When the battery is used up, please charge it in time to avoid over-discharge. | ||||
| ◆ | Never charge the battery in thundery, rainy or humid conditions; otherwise the appliance or the internal electrical components of power supply would get burnt. | ||||
| ◆ | Always use a dedicated charger. After charging is completed, unplug the charger in time, otherwise it may lead to short circuit or explosion. | ||||
| ◆ | The operating temperature is recommended to be within 0 ~ 26°C, and the allowable operating temperature should be within -10 ~ 40°C. Exceeding the limit would reduce the service life of the product, damage it or even lead to personal injury |
Attachment
News
- "SATA Cup" The 46th World Skills Contest Automotive Technology Project of Jilin Province was successfully completed
- SATA introduced a more powerful compressed air purification device with great power and a new automatic control function
- Choose a hard hat guide and let safety start from scratch!